Solid shafts and replaceable tips make these tools more rigid and comfortable to use. The 10mm is the one one the bottom right of the picture. This is my 'go to' when I am making my mini hats.

The Woodcut MillDrill was designed to make the production of salt and pepper grinders that utilise the CrushGrind® mechanism, easier and quicker. The MillDrill will accurately cut the first two holes (45mm and 38mm) at the correct depths for the fitting of a CrushGrind® mechanism after the cutters have been set. Setting the cutters is a simple process. All that is needed is the Allen key provided and either a set of vernier calipers or an accurate rule. It incorporates a No2 morse taper so it will fit into the tailstock of most lathes which means the drilling process can be done on the lathe.
In drilling the 45mm hole to the correct depth the 38mm hole will also be at the correct depth. The Woodcut MillDrill has been designed in such a way to ensure the difference in the depths of the two holes is according to the dimensions of the CrushGrind® mechanism.
The Woodcut MillDrill has the added feature of being able to act as a chuck for drill bits with a 10mm shank. Many forstner bits have reduced shanks that measure 10mm and these can be inserted into the front of the Woodcut MillDrill with the front cutter removed.

Woodcut's new articulated head hollowing tool. Comes with two links, the straight and the curved. The links are made from aircraft specification high tensile steel to ensure there is no flex. The tool will fit through a 15mm aperture, the shaft being 1/2" or 12.7mm diameter.

Handle available seperately.

The Pro Kit No 1 comprises of the Pro-Forme handle and the Pro-Forme straight shaft and cutter head. An instruction manual and CD Rom with a short video clip is also included in the box.

The new Woodcut Pro-Mount with an M33 x 3.5 chuck mandrel. Uses with the same toolpost as the Bowlsaver and the Irons Toolgate.(Here it is shown mounted on an optional 30mm toolpost)

A bowl saving device that is easy to set up and use . The major difference with this one is that you can make "bonus bowls" the first time you use it. (TOOL POST NOT INCLUDED) (Special toolpost sizes available on request)

The unhandled gouges are supplied with a heavy duty brass ferrule to give a professional finish to your custom handle.
The 10mm gouge is on the right of the group.

19mm (3/4")x 120mm 4 3/4") Toolpost (The length of the toolpost may need to be reduced to suit individual lathes.)